Standard Items
Parts I Machine Every Week
These are the jobs that come across my bench most often. If yours is close to one of these, I can turn a quote around fast. If it's something else entirely, I still want to see the print.
Quoteable standard items
Most items below run in 6061 or 7075 depending on what your application needs — the MC-HS-80 is 6061-T6 only. These aren't off-the-shelf stock parts — I cut each one to your print or spec, in the quantity you actually need.
MC-BRK-90 — 90° L-Bracket
3.15" × 2.00" × 2.00", 5/16" legs, 4× #10 clearance per face, 6061-T6 (7075 only if high-load)
Material options
6061 or 7075 aluminum
Typical use
Sensor mounts, motor mounts, panel supports, and general structural attachment points where you need a rigid, repeatable part.
MC-FIX-100 — Fixture Plate
4.00" × 4.00" × 1/2", 0.40" M6 tap-drill grid, 4× Ø0.26" corners, 6061-T6
Material options
6061 or 7075 aluminum
Typical use
Work-holding and tooling plates — tapped hole patterns, dowel locations, and flat, stress-relieved stock for jigs and fixtures.
MC-ADP-NEMA23 — NEMA 23 Adapter
2.75" × 2.75" × 0.20", 1.856" hole square, Ø0.87" bore, Ø1.50" pilot, 6061-T6
Material options
6061 or 7075 aluminum
Typical use
Bolt-pattern transitions between two components that were never designed to mate — motor-to-gearbox, sensor-to-bracket, panel-to-frame.
MC-ENC-S — Electronics Housing
3.5" × 2.4" × 1.25", 2-piece, ~0.12" walls, U-slots, 4× M3 corners, 6061-T6
Material options
6061 or 7075 aluminum
Typical use
Compact machined enclosures for electronics, sensors, or small assemblies that need a clean fit and a finished look.
MC-HS-80 — Heat-Spreader Plate
3.15" × 3.15" × 1/4", 3-axis fins, 6061-T6 only (not 7075)
Material options
6061-T6 only
Typical use
Flat or finned plates for thermal transfer off electronics and power components — machined for full-contact flatness.
Send me the print. I'll quote it.
Most of my work is custom job-shop machining, not catalog parts. If you've got a bracket, plate, or component that doesn't fit these five categories, that's normal — send the file and I'll get you a real number.